Honda Crosstour Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
I do not like the feature where you remove your key and only the driver's side door unlocks automatically. Does anyone know where to get an electronic copy of a 2010 CT wiring diagram (besides contacting the dealer) so that I can wire all of the locks to open when I remove the key? Or at least the front doors? Thanks!

Ryan
 

· Registered
Joined
·
291 Posts
Huh? You can set your car to unlock all the doors if you wish, and can set it to either when you put the car in park, or when you turn off the car. Read the manual.
 

· Registered
Joined
·
291 Posts
Here are the five possible settings:

  1. The auto door unlocking is deactivated.
  2. The driver's door unlocks when you move the shift lever into Park.
  3. All doors and tailgate unlock when you move the shift lever into Park.
  4. The driver's door unlocks when you turn the ignition switch to accessory.
  5. All doors and tailgate unlock when you move the ignition switch to accessory.

There are similar settings for auto door locking as well. Check pages 80 to 86 of the manual.
 

· Registered
Joined
·
19 Posts
Discussion Starter · #5 ·
I'm reading that now. Sorry for the rook mistake. Had an '09 Fit and had to wire it myself...should have checked for differences first. Thanks!
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top