Honda Crosstour Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
Hey guys,

Recently purchased a 2010 Crosstour EX-L 4WD in White/Black interior. Looking to change the wheels and I wanted to find out a couple of things in regards to wheel sizes and specifications.

From what I know the CT EX-L comes with the following dimensions.

18X7 - 55mm offset.

My question is.. Is this all around the same? so 18X7 55m offset on all 4 wheels? Also, what is the hub bore diameter size?


Thanks in advance for the help guys! :)

Danny
 

· Registered
Joined
·
92 Posts
Hey guys,

Recently purchased a 2010 Crosstour EX-L 4WD in White/Black interior. Looking to change the wheels and I wanted to find out a couple of things in regards to wheel sizes and specifications.

From what I know the CT EX-L comes with the following dimensions.

18X7 - 55mm offset.

My question is.. Is this all around the same? so 18X7 55m offset on all 4 wheels? Also, what is the hub bore diameter size?


Thanks in advance for the help guys! :)

Danny
Looks like we got the same vehicle and I just confirmed:

Rims/wheels: 18"x7" on all 4 wheels, offset is 55mm, bolt pattern is 5 x 114.3, while the centre bore is 64.1 mm.

Not sure where you live but for winter, Honda in Canada is installing 17" rims which allegedly are the same steel rims that come on the base CR-V. The tire size recommended for 17" winter rubber on our CT is what the 2WD modes comes with, 225/65/17.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top