[Packernan120203]

Shot in the dark here but I just looked at the sedan and coupe's moonroof visors, they're in stock on hondapartsnow

<-- coupe

<-- Sedan

<--Crosstour

Comparing part numbers for the 3 shows that the coupe uses the same glass, tracks, and sunshade as the crosstour, so would its visor work on the crosstour? i know that the hardware part of the visor is in different spots but what does that really matter considering that the hardware is the same in both kits anyway

Here's a crosstour i saw like almost a year ago with one, looks nice, oh and if this is your car I took this at a shoe store

 

[jnrdice431]

Hi


Sent from my iPhone using Tapatalk

 

[Ang]

Yes it should fit, my accord and my crosstour sunroofs are the same size.

 

[Packernan120203]

Yes it should fit, my accord and my crosstour sunroofs are the same size.

Bought the coupe's visor, should ship out soon. See how it goes.

 

[Packernan120203]

Its backordered until the 13th, its too cold to install it right now anyway.

 

[L8Apex]

FYI - I took my moonroof visor off to apply a ceramic coating followed by a graphene coating recently. There were small cracks in the M6 hardware. So, I replaced the OEM hardware with button head hex drive M6 bolts for motorcycle windscreen faring mounting bolts.

 

[Packernan120203]

Good news: You can use the 08-12 Accord Coupe's sunroof visor on the 2010-15 Crosstours, just make sure you get the hardware kit for the crosstour as the coupe has a little bit of a skinnier design.

Install was definitely a pain in the ass and took me an hour and 20 minutes, but it looks great so im happy with it.

Wind noise is for sure reduced (still have issues with the doors and or windows). And it won't fly off at top speed (tested in a controlled environment...)

Should've taken a picture from inside, the finned look is a lot more noticeable looking up at it.

 

[Packernan120203]

Its got a little honda logo in it too, best part about oem

 

[L8Apex]

Keep an eye on the mounting bolts. I found stress cracks under mine after a few years and replaced them with motorcycle faring titanium button head bolts.

 

[Packernan120203]

Keep an eye on the mounting bolts. I found stress cracks under mine after a few years and replaced them with motorcycle faring titanium button head bolts. View attachment 10166

yup, you mentioned that already, I'll look at it in a few years, the brackets and bolts are steel so they're fine, but the nuts are plastic. I do have a bunch of leftover hardware from the engine swap so I'll see if I need to use that stuff eventually.

Next up on the accessories list is splash guards and the interior ambient lighting

 

[Mojo86]

yup, you mentioned that already, I'll look at it in a few years, the brackets and bolts are steel so they're fine, but the nuts are plastic. I do have a bunch of leftover hardware from the engine swap so I'll see if I need to use that stuff eventually.

Next up on the accessories list is splash guards and the interior ambient lighting

Was the oem visor for the Crosstour discontinued? I was thinking of putting one on my 2012 EX L.

 

[Packernan120203]

Was the oem visor for the Crosstour discontinued? I was thinking of putting one on my 2012 EX L.

Yes, if you want to still put one on, do what I did, get the one for the 2008-12 Accord Coupe, and get a hardware kit for the 10-15 Crosstour

Accord Visor - 08R01-TE0-100
Crosstour Hardware Kit - 08R01-TP6-100R1

If you try to use the Coupe's hardware you will get through the 2 side brackets but the front 2 will be too short, that's where the Crosstour kit comes in, the front brackets are a lot taller than the Coupe's making the install actually possible.

I talk about this site a lot but HondaPartsNow is a great distributor for pretty much everything you would need, and it's a lot cheaper than going through a dealer, I've done 9 transactions with them already and the cost has probably gotten close to the car itself... No issues with them unless a part is discontinued and just hasn't been updated on their site, then the emails for them cancelling the order take a while to receive.

 

[Mojo86]

Thanks for the response - especially the part # details. I may give it a go.