Honda Crosstour Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have my cross tour for 7 years. So that last couple something new is happening.

The door are always locking

For example, today I took a few groceries out of the car into the house
Shut the door

10 minutes later when I for the rest of items all the doors were locked

This happens all the time in the last two week but never in the prior 7 years

Any input what is going on

Thanks
 

·
Registered
Joined
·
41 Posts
Auto Door Locking
The auto door locking feature has three possible settings:
• The auto door locking is deactivated all the time.
• The doors and tailgate lock whenever you move the shift lever out of the Park (P) position.
• The doors and tailgate lock when the vehicle speed reaches 10 mph (15 km/h).
This is the default setting.

To turn off the Auto Door Lock modes:
1. Make sure the shift lever is in the Park (P) position.
2. Turn the ignition switch to the ON (II) position, and open the driver’s door.
3. Push and hold the front of the master door lock switch on the driver’s door until you hear a click (after about 5 seconds).
4. Release the switch, and within 20 seconds, turn the ignition switch to the LOCK (0) position.

To program the Park Lock mode:
Locks all doors and tailgate when the shift lever is moved out of the Park (P) position.
1. Make sure the shift lever is in the Park (P) position.
2. Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.
3. Push and hold the front of the master door lock switch on the driver’s door. You will hear a click. Keep holding the switch until you hear another click (after about 5 seconds).
4. Release the switch, and within 20 seconds, turn the ignition switch to the LOCK (0) position.

To program the Drive Lock mode:
Locks all doors and tailgate when the vehicle ’s speed reaches about 10 mph (15 km/h).
1. Make sure the shift lever is in the Park (P) position.
2. Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.
3. Push and hold the brake pedal, and move the shift lever out of the Park (P) position.
4. Push and hold the front of the master door lock switch on the driver’s door. You will hear a click. Keep holding the switch until you hear another click (after about 5 seconds).
5. Release the switch, and within 20 seconds, turn the ignition switch to the ACCESSORY (I) position. Move the shift lever to the Park (P) position.
6. Turn the ignition switch to the LOCK (0) position.
 

·
Registered
Joined
·
139 Posts
Auto Door Locking
The auto door locking feature has three possible settings:
• The auto door locking is deactivated all the time.
• The doors and tailgate lock whenever you move the shift lever out of the Park (P) position.
• The doors and tailgate lock when the vehicle speed reaches 10 mph (15 km/h).
This is the default setting.

To turn off the Auto Door Lock modes:
1. Make sure the shift lever is in the Park (P) position.
2. Turn the ignition switch to the ON (II) position, and open the driver’s door.
3. Push and hold the front of the master door lock switch on the driver’s door until you hear a click (after about 5 seconds).
4. Release the switch, and within 20 seconds, turn the ignition switch to the LOCK (0) position.

To program the Park Lock mode:
Locks all doors and tailgate when the shift lever is moved out of the Park (P) position.
1. Make sure the shift lever is in the Park (P) position.
2. Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.
3. Push and hold the front of the master door lock switch on the driver’s door. You will hear a click. Keep holding the switch until you hear another click (after about 5 seconds).
4. Release the switch, and within 20 seconds, turn the ignition switch to the LOCK (0) position.

To program the Drive Lock mode:
Locks all doors and tailgate when the vehicle ’s speed reaches about 10 mph (15 km/h).
1. Make sure the shift lever is in the Park (P) position.
2. Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.
3. Push and hold the brake pedal, and move the shift lever out of the Park (P) position.
4. Push and hold the front of the master door lock switch on the driver’s door. You will hear a click. Keep holding the switch until you hear another click (after about 5 seconds).
5. Release the switch, and within 20 seconds, turn the ignition switch to the ACCESSORY (I) position. Move the shift lever to the Park (P) position.
6. Turn the ignition switch to the LOCK (0) position.
Doesn't seem to complicated. 🤔 😅
 
1 - 3 of 3 Posts
Top