Honda Crosstour Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello Crosstour fam.
I have a 2010 Crosstour. On my way home from work, my check engine light came on. I noticed a vibrations in the engine and it was idling rough. Then it had a hard time taking off, it just wouldn’t go. Hooked it up to the code reader and it shows p3400. Looked up the code online and found that it could be several different things. How can I figure out what exactly is causing the problem? I got the freeze frame info but I don’t know what any of that means. Any suggestions on narrowing down the problem part?

Thanks in advance,
Fame

Freeze frame info:

Fuelsys1: ol_fault
Fuelsys2: ol_fault
Load pct (%): 59.6
Etc (*f): 158
Shrtft1 (%): 0
Longft1 (%): 0
Shrtft2 (%): 0
Longft2 (%): 0
Map (inHg): 18.0
Rpm (/min): 677
Vss (mph): 0
Sparkadv (*): 6
Iat (*f): 100
Maf (lb/min): 1.591
Tp (%): 18.0
Runtm (sec): 249
Egr_ptc (%): 0
Egr_err (%): 0
Evap_pct (%): 0
Fli (%): 49.8
Baro (inHg): 27.5
Vpwr (V): 14.025
Load_Abs (%): 62.7
Eq_rat: 0.999
Tp_r (%): 8.6
Tp_b (%): 34.5
App_d (%): 19.6
App_e (%): 9.4
Tac_pct (%): 9.4
 
1 - 1 of 1 Posts
Top