Check Your Rear Brake Pads - Honda Crosstour Forums
     Honda Crosstour Forums
Auto Insurance

Go Back   Honda Crosstour Forums > Honda CrossTour Forums > Crosstour General Discussion

CrossTourOwnersClub.com is the premier Honda Crosstour Forum on the internet. Registered Users do not see the above ads.
Reply
 
Thread Tools
Old 05-02-2017, 04:39 PM   #1
wrn
Junior Member
 
Join Date: Jul 2013
Posts: 7
Default Check Your Rear Brake Pads

Ref: 2013 6cyl AWD

What a surprise when I discovered that the original Honda rear brake pads were down to less than 1mm at 29,300 miles! The outers wore more than the inner so the worn pad warning did not sound.

So I purchased new Honda rear pads and much to my surprise the friction material measures 8mm! The standard thickness I have seen for my other cars is 12mm. No wonder they were gone.

I hope this prevents an expensive brake job for someone.

Few questions:
Why are the OEM Honda rear pads only 8mm?
Are aftermarket rear pads 8mm? or 12mm?
wrn is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 05-03-2017, 10:00 AM   #2
GL84
Senior Member
 
GL84's Avatar
 
Join Date: Jun 2014
Location: New York City
Posts: 751
Default

Thanks for the post,

OEM Honda Brakes Calipers and rotors are tiny.

Even when I switched to aftermarket rotors and pads (EBC Yellow Stuff) the pads wore out extremely quick in the rear... 2 sets of rear per 1 set of fronts.

I am a spirited driver and load up the car for long distance trips etc. so the brakes take a beating for sure, but you guys should inspect your brakes every quarter or half year at minimum.

I'm running a BBK atm, and it should last much longer because of the increased surface area for the same amount of force, but for OEMs you should definitely be careful.
__________________
2014 Ex-L V6 4WD w/ Nav Polished Metal Metalic
6000K HID Low | 6000K HID High (DLR Off) || 6000K LED Fog Lights | 6000K Interior LEDs | Blue Footwell/Door Sills LED
K&N Typhoon 69 SRI | Acura TL Throttle Body + Intake Manifold + IM Spacer | RV6 HFPC + J-Pipe + HFC
CSS Custom Springs +20% Spring Rate | PB-Brakes BBK F 380mm 8Pot / R 356mm 6Pot | 20mm Rear Swaybar from Acura TL
20" TSW Nurburgring (Gunmetal) Wheels | 245/45ZR20 Continental Extremecontact DSW Tires
GL84 is offline   Reply With Quote
Old 05-04-2017, 08:24 PM   #3
edubfromktown
Senior Member
 
edubfromktown's Avatar
 
Join Date: Jul 2010
Location: Maryland
Posts: 280
Default

Great advice...

I replaced the stock rotors @~70k miles and the rear pads were way down compared to the fronts.
edubfromktown is offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 01:33 AM.



Powered by vBulletin® Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.